Accessory [ja]

500308 Alignment Unit D-Series [ja]

500308 Alignment Unit D-Series [ja]

Allows +/-4° adjustment in two axis; Ideal for distances up to about 300m; Steel, zinc-plated; Applicable for D-Series; country of origin: Switzerland
500309 Protective Cover for Alignment Unit D-Series [ja]

500309 Protective Cover for Alignment Unit D-Series [ja]

For light, short-term outdoor applications; Protection only with horizontal laser exit; No IP protection class; Can only be used together with "500308 Alignment unit D-Series"; country of origin: Switzerland
500700 PROFINET Interface for D-Series [ja]

500700 PROFINET Interface for D-Series [ja]

An exchangeable cover for self installation; country of origin: Switzerland
500701 EtherNet/IP Interface for D-Series [ja]

500701 EtherNet/IP Interface for D-Series [ja]

An exchangeable cover for self installation; country of origin: Switzerland
500702 EtherCAT Interface for D-Series [ja]

500702 EtherCAT Interface for D-Series [ja]

An exchangeable cover for self-installation; country of origin: Switzerland
500310 Air-cooling jacket for D-Series sensors with standard interface [ja]

500310 Air-cooling jacket for D-Series sensors with standard interface [ja]

This air-cooling jacket can be used with all Dimetix D-Series Laser Sensors that are equipped with standard interfaces. The sensor extensions PROFINET, Ethernet/IP and EtherCAT cannot be used with this air-cooling jacket.
500311 Air-cooling jacket for D-Series Sensors with Industrial EtherNet [ja]

500311 Air-cooling jacket for D-Series Sensors with Industrial EtherNet [ja]

This air-cooling jacket protects the laser sensor and cools it with air. It is used with the Dimetix D-Series sensors that are equipped with the sensor extensions PROFINET, Ethernet/IP or EtherCAT. The Dimetix D-Series Laser Sensors that are equipped with standard interfaces require a different air-cooling jacket.
500595 Accessories for Starter Kit D-Series [ja]

500595 Accessories for Starter Kit D-Series [ja]

USB-cabel 2m Power supply USB-Stick with Manual, Utility Software and accessories summary country of origin: Switzerland
500001 Calibration Certificate [ja]

500001 Calibration Certificate [ja]

for new measuring devices (must be ordered together with the device)
500002 Recalibration Ceritficate [ja]

500002 Recalibration Ceritficate [ja]

Recalibration with calibration certificate for used measuring devices
500205 Sensor cable, A-Coded, 5pole, 5m, female [ja]

500205 Sensor cable, A-Coded, 5pole, 5m, female [ja]

with M12 5pin sensor-connector IP65, other side open ends country of origin: Italy
500113 Reflective Plate 210 x 297 mm [ja]

500113 Reflective Plate 210 x 297 mm [ja]

The reflective aluminum target plate provides a defined measuring target. It improves the reflected signal strength. This improved signal strength is used by the D-Series to measure long-distance ranges. Please check the device specification to ensure the applicable minimum distances.
500206 Sensor cable, 2x D-Coded, 4pole, 5m, male [ja]

500206 Sensor cable, 2x D-Coded, 4pole, 5m, male [ja]

with M12 4pin male sensor-connectors IP65 on both sides, cable color: green, for Industrial Ethernet country of origin: Taiwan
500207 Sensor cable, D-Coded-RJ45, 5m [ja]

500207 Sensor cable, D-Coded-RJ45, 5m [ja]

with M12 4pin male sensor-connector to RJ45, cable color: green, for Industrial Ethernet country of origin: Taiwan
500114 Reflective Foil 600 x 1200mm [ja]

500114 Reflective Foil 600 x 1200mm [ja]

The reflective foil provides a defined highly-reflecting measuring target. It improves the reflected signal strength. This improved signal strength is used by the D-Series to measure long-distance ranges. Please check the device specification to ensure the applicable minimum distances.
500215 Numeric Digital Display [ja]

500215 Numeric Digital Display [ja]

Numeric digital display 6 digits Character height 14mm; LED red; RS-232/485; Reading distance: 1…5m
500301 Exchangable Cover Assembly without Borehole [ja]

500301 Exchangable Cover Assembly without Borehole [ja]

An exchangeable cover set for self-installation; country of origin: Switzerland
500300 Spare part kit D-Series [ja]

500300 Spare part kit D-Series [ja]

Includes 10 items: - Cable Glands M16x1.5, black, Plastic - Hexagonal nut brass M16x1.5 - Terminal Block1 coded and printed - Terminal Block2 coded and printed - Set Screw M4x4Tuflock - Rear Screw Freedriv M2.5x18.5mm; Country of origin: Switzerland