500206 Sensor cable, 2x D-Coded, 4pole, 5m, male
with M12 4pin male sensor-connectors IP65 on both sides, cable color: green, for Industrial Ethernet country of origin: Taiwan; TN: 8544.4190
500207 Sensor cable, D-Coded-RJ45, 5m
with M12 4pin male sensor-connector to RJ45, cable color: green, for Industrial Ethernet country of origin: Taiwan; TN: 8544.4190
500700 PROFINET Interface for D-Series
Exchangeable cover for self installation; country of origin: Switzerland; TN: 9015.9000
500701 EtherNet/IP Interface for D-Series
Exchangeable cover for self installation; country of origin: Switzerland; TN: 9015.9000
500702 EtherCAT Interface for D-Series
Exchangeable cover for self installation; country of origin: Switzerland; TN: 9015.9000
500300 Spare part kit D-Series
Includes 10Pcs. of: - Cable Glands M16x1.5, black, Plastic - Hexagonal nut brass M16x1.5 - Terminal Block1 coded and printed - Terminal Block2 coded and printed - Set Screw M4x4Tuflock - Rear Screw Freedriv M2.5x18.5mm; Country of origin: Switzerland; TN: 9015.9000
500590 Starter Kit DLS/FLS
The starter kit accessories helps to familiarize with DLS Distance-Laser-Sensors. The Kit includes all necessary Components to operate a DLS Sensor. Consisting of:- RS-232 configuration cable (500200)
- Power Supply (In: 100 ... 240 VAC, 0.6A Out: 24 VDC, 0.75 A)
- DLS Utility Software
- DLS-C Manual
Not usable for devices with extendet temperature range (heater)
FLS/DLS Distance Laser Sensor must be ordered separately
500592 Starter Kit EDS-C
The starter kit accessories helps to familiarize with EDS Distance-Laser-Sensors. The Kit includes all necessary Components to operate a EDS Sensor. Consisting of:- RS-232 configuration cable (500204)
- Power Supply
- EDS-C Utility Software
EDS-C Laser Distance Sensor must be ordered separately
500213 Alignement Jig
Adjusting angle: ±7° in two directions Material: stainless steel (V2A) Recommended for distances up to 50m Applicable for EDS/DLS/FLS
500113 Reflective Plate 210 x 297 mm
Reflective plate 210 x 297 mm (orange) applicable distance range DLS: from about 25m to 500m applicable distance range FLS: from about 0.5m to 500m
500114 Reflective Foil 600 x 1200mm
Reflective foil 600 x 1200 mm (orange) for self fitting, applicable distance range DLS: from about 25m to 500m FLS: from about 0.5m to 500m
500001 Calibration certificate
for new measuring devices FLS / DLS (must be ordered together with the device)
500002 Recalibration Ceritficate
Recalibration with calibration certificate for used measuring devices DLS/FLS
500215 Numeric Digital Display
Numeric digital display 6 digits Char. height 14mm; LED red; RS-232/485; Reading distance: 1…5m applicable for DLS/FLS
500214 DIMS Profibus external Interface
Profibus/RS-422 converter, IP20 module, mountable on 35 mm DIN rail applicable for DLS/FLS/D-Series
500209 Converter USB to RS-232
USB to serial port converter. It provides a connection from the sensor to the USB port of a PC, notebook or handheld computer device.
500200 RS-232 Configuration Cable FLS/DLS
RS-232 Configuration cable DLS/FLS Length = 3m, with 15 pin connector IP65 and 9 pin connector This RS232 configuration cable is made to connect Laser Distance Sensor DLS/FLS to the PC and a power supply for easy configuration.
500204 RS-232 Configuration Cable EDS-C
Length = 3m, with M12 5 pin connector IP65 and 9 pin D-sub connector applicable for EDS
500205 Sensor cable, A-Coded, 5pole, 5m, female
with M12 5pin sensor-connector IP65, other side open ends country of origin: Italy; TN: 8544.4190
500290 Connector straight IP65 for 15 Pin D-Sub Connector
cable diameter range 6 to 10 mm applicable for DLS/FLS
500253 Connector 90° IP65 for 15 Pin D-Sub Connector
Connector 90° IP65 for 15 pin D-Sub connector maximum cable diameter is 5 mm applicable for DLS/FLS
